Connect your devices to the Nokia FastMile gateway

How to connect Wi-Fi devices to the Nokia FastMile 5G Gateway 3.2

There are two ways that you can connect WiFi devices to the FastMile 5G Gateway.

1. The SSID and WiFi key
   1. Locate the SSID and WiFi key on the sticker on the bottom of your FastMile 5G Gateway.
   2. Select your network's SSID (the name of your Wi-Fi) in the list of available networks.
   3. Input the Wi-Fi key (password) when prompted.
   4. Select Connect.
2. The WPS button
   1. Locate and press the WPS button on the backside of the Gateway to start the Wi-Fi Protected Setup process.
   2. Select the WPS option to connect
      • This will automatically connect your device to the gateway without needing to enter the WiFi password.

How to connect your Ethernet

Connect the Ethernet LAN cable to either of the two Gigabit Ethernet LAN connectors on the backside of the Nokia FastMile 5G Gateway 3.2.

Check your connection by checking your LED signal:

• If the 5G LED is lit and all three-signal strength LEDs are lit, it means you have a good 5G connection.
• If the 5G LED isn't lit but all three signal strength LEDs are lit, it means you have a good 4G/LTE connection.
• If the 5G LED is lit with any other pattern, fix your connection by checking the centre LED:
  • If the centre LED shows a slow blinking red, it means your SIM card is missing. We recommend installing it or replacing it.
  • If the centre LED shows a solid red, it means you have no 4G/LTE or 5G connection and will need to reposition the gateway.
  • If the centre LED shows a solid green:
    • Press the signal test button on the side of the unit to determine:
      • the type of service (4G or 5G)
      • the signal strength for 5G and signal strength LEDS