Loading...

Pair the Key Fob to the Touchpad

These steps outline how to pair and/or un-pair a key fob to the touchpad.

Un-pair a Key Fob

  1. Tap Settings, on the touchpad.
  2. Ask the customer to input their Master Code.
  3. Select Home Devices.
  4. Select Key Fobs.
  5. Select Delete Key Fob.
  6. On the Remove Key Fob screen, tap on the key fob that needs to be un-paired.

Pair a Key Fob

  1. Tap Settings, on the touchpad.
  2. Ask the customer to input their Master Code.
  3. Select Home Devices.
  4. Select Key Fobs.
  5. Select Add Key Fob.
  6. Press and hold Arm and Disarm.
  7. While holding down the two buttons insert the battery into the sensor and close the back cover.
  8. Release Arm and Disarm once the battery cover is secured.
  9. The green LED on the front of the key fob will flash three times to indicate the device is in pairing mode.
  10. Once the touchpad finds the device, press any button on the key fob to finalize pairing.
  11. Click done and verify the number of key fobs added to the system.
  12. Click Next.
  13. Tap on the key fob to rename the device. You will also see an option to disable the Panic feature.
  14. Click Next to finish pairing.