How to Pair the Sengled Light Bulb Using the Touchpad

This article is for customers with a Touchpad. Don’t have a Touchpad? Visit this page for your pairing instructions.

Follow these steps to pair your light bulb with the Smart Home Monitoring Touchpad.

Before you begin:

Please install one LED Light Bulb at a time. Before physically installing the LED Light Bulb in the lamp or light fixture follow steps 1 through 5.

Ensure your Smart Home Monitoring system is disarmed. 

  1. On the Touchpad, select the Settings app from the Home Screen.
  2. Enter your 4-digit Master Access Code. (The same code that you use to manage your system.)
  3. Select Home Devices under the Categories
  4. Scroll down and select Lighting, then select Add Light.
  5. On the Locating Lighting Devices screen press Next. The system will take up to 30 seconds to find the LED Light Bulb.
  6. Install the LED Light Bulb in the lamp or light fixture. Ensure that the lamp or light fixture is receiving power. This automatically starts the pairing process.
  7. On the Touchpad, a Pairing icon will appear and change to a Lighting icon once pairing is complete.
  8. Tap Done once the Lighting icon appears. Then tap Next to confirm.
  9. The Lighting icon will be shown again. Tap on the Lighting icon to customize its name (e.g. Desk Lamp). If dimming is desired, edit the Dimmable option by choosing Yes in the drop-down menu.
  10. Click Return to Menu to complete the pairing of the LED Light Bulb.