Troubleshooting device connections with your Nokia 5G Gateway 12

Learn how to connect your devices using Wi-Fi or Ethernet. 

Connect Wi-Fi Devices to the Nokia Gateway 12 

You’ve got two ways to connect your devices over Wi-Fi with the Nokia Gateway 12: 

Connect Over Wi-Fi

There are two ways to connect your devices wirelessly: 

Option 1: Using the SSID and Wi-Fi key  
  • Locate the SSID and Wi-Fi key printed on the label at the bottom or back of your Nokia Gateway 12.  
  • Select your network's SSID (the name of your Wi-Fi) in the list of available networks.  
  • Input the Wi-Fi key (password) when prompted. 
  • Select Connect. 

Option 2: Using the WPS Button  

  • Locate and press the WPS button on the backside of the Gateway to start the Wi-Fi Protected Setup process. 
  • On your device, select the WPS option to connect.  
  • Your device will connect automatically without needing to enter the Wi-Fi password.  

Connect via Ethernet  

If you prefer a wired connection: 

  • Plug an Ethernet cable into one of the Gigabit LAN ports on the back of the Nokia Gateway 12.  
  • Connect the other end to your device (e.g., computer, gaming console).  
  • Your device should automatically detect the wired connection.  

How to reposition the Gateway (if needed)  

If your signal is weak, try repositioning the Gateway:  

  • Power off the Nokia Gateway 12 and unplug it.  
  • Move it to a different location, preferably near a window or higher up usually works best. 
  • Plug it back in and power it on.  
  • Check the LED indicators to confirm signal strength.  
  • Repeat the process until you find the optimal spot.  

Tip: Once you’ve found a strong signal location, avoid moving or rotating the Gateway. That can affect performance.