Add or Delete Door Lock User Codes

The following steps explain how to add or delete door lock user codes from the keypad.

Adding User Codes

  1. Press the program button.
  2. Enter a new 4-8 digit user code.
  3. Press the lock button.
  4. If successful, the keypad will flash green once and you will hear 1 beep (if switch #3 is on).
  5. If unsuccessful, user code may already be programmed or maximum of 30 user codes have been programmed.
  6. Verify new user code can be used to unlock the door lock.

Deleting User Codes

  1. Press the program button.
  2. Press the lock button.
  3. Enter user code to delete.
  4. Press lock button.
  5. Re-enter user code to delete.
  6. Press lock button.
  7. If successful, the keypad will flash green once and you will hear 1 beep (if switch #3 is on).
  8. If unsuccessful, complete steps 1-6, ensuring the same code is entered in steps 3 and 5.
  9. Verify user code can no longer unlock the door lock.

Adding User Codes

  1. Enter the master code then press # to enter the menu.
  2. Select 2 then press # to register a code.
  3. Select option 1 to register a user code.
  4. Select a user slot (from 1-250) to place the code and press # to confirm.
  5. Enter a 4-8 digit user code and press # to confirm, then press * to complete the process or # to add more user codes.

Deleting User Codes

  1. Enter the master code then # to enter the menu.
  2. Select 2 then press # to register a code.
  3. Select option 3 to delete an existing user code.
  4. Select a user code slot (from 1-250) to delete the corresponding code and press # to confirm deletion.
  5. Then press * to complete the process or # to continue to delete user codes.